|
|
|
 Model
Name:
BIG-201AM
Description: ADSL Router,
1 WAN + 1 LAN (Switch)
w/ ADSL Modem Built-in
The BIG-201AM from Pheecom is
a perfect 'no frills' ADSL router. No additional modem is required.
This router is highly
recommended for a small network environment and includes features which
mix the simplicity associated with modems with the performance advantages
of an Ethernet router.
Ideal for use in a small
networked setup with an existing firewall. DHCP server built-in assigns
network IP addresses automatically.
Configuration is simple and is
done via a simple and intuitive graphical browser user interface.
|
Features |
- ADSL-compliant with
ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt), and G.992.2 (G.lite)
- DHCP server & client:
Automatically assign IP address to network users & automatically get IP
address from DHCP server
- IP Sharing: sharing a
single IP account within your entire network using the NAT routing
function
- Full ATM protocol
support
- Configuration,
management & firmware update via simple and intuitive graphical web
browser user interface
- Two-level password
protection for management
- Connect distance up
18,000 feet is achievable over standard loops
- Data rate up to 8 Mbps
downstream and up to 1 Mbps upstream
- NAT, NAPT, DHCP
server, DMZ, Virtual servers features are available in routing mode
|
| |
|
|
Specifications: |
|
|
Standard |
Compliant with ANSI T1.413 Issue 2 ,ITU G.dmt (G.992.1)
ITU G.lite (G.992.2) |
|
Interface |
WAN:RJ-11 Modular Jack
LAN:RJ-45 10/100 fast Ethernet interface |
|
Protocols |
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Classical IP over ATM (RFC 1577)
Bridged/routed Ethernet over ATM (RFC 2684/1483) |
|
Router Mode Support |
IP routing-RIOv2 (backward compatible with RIPv1)
DMZ, Virtual server, System log
DHCP (Dynamic Host Configuration Protocol) Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
IGMP (Internet Group Management Protocol) |
|
Loop Range |
Up to 18,000 feet |
|
Power Requirements |
12 VAC / 1000mA |
|
LED Indictors |
Power, Ready, WAN (Link, RXD), LAN (ACT, LINK) |
|
Dimensions |
13.8 x 17.1 x 2.55cm(W x D x H) |
|
Compatibility |
WIN 98 ; WIN 2000 ; WIN ME ; WIN XP |
|
Environment |
0C to 40C (Temperature operating)
-35C to 70C (Temperature storage)
Humidity: 0-95%, non-condensing |
|
Certification |
FCC, CE |
|
